No-Till Drill for Rent
|
|
The District has a six foot (6 foot drilling width - 8.5 foot total width), Land Pride, model 606NT no-till drill. The drill has three different seed boxes. This allows for the opportunity to drill a variety of seeds. From corn or soybean sized seed to legume and grass sized.
To pull and operate the drill requires at least a 40 horsepower tractor with hydraulics. The drill is equipped with Pioneer hydraulic adaptors. The drill is narrower than some (six foot effective drilling width, eight and a half foot total width). That is because in an urbanizing county, traversing the public roads is difficult with wider equipment.
Plan on a drilling rate of 3 to 6 acres per hour depending on field condition, We suggest that you are ready to work when you get the drill. This includes having all the seed you need on hand and the tractor fueled up.
To get the drill to your site you will need a vehicle with a hitch. The hitch will need to have a hole large enough to accommodate a one inch pin for pulling.
Final note: The drill is only to be used in fields without stumps or rock layers where drill will be pulled across. Generally it is used to seed cropland areas (whole fields, wildlife food plots, filter strips, cover crops and such) or inter-seeding in pastures to improve stand. It is NOT for pastures where trees were cleared and stumps present. Fields will be checked as needed before renting the drill.
Link to forms related to use of the drill.
For more information:
Call (785) 266-9053
Email: [email protected]
Access the documents tab related to the no-till drill rental and operation on this website. In short, a $200 deposit and completed forms are required before the actual use of drill.
There is just one drill. We do the best to accommodate when you want the drill. We try and balance the current location of drill, weather and actual field condition you plan to drill and timeliness to the seed you are planting.
The drill is made possible by the following organizations.
Western Resources Green Team - Pheasants Fever Chapter of Pheasants Forever
Kaw Valley Chapter of Quail Unlimited - Wild Turkey Federation
and the
Shawnee County Conservation District
Plan on a drilling rate of 3 to 6 acres per hour depending on field condition, We suggest that you are ready to work when you get the drill. This includes having all the seed you need on hand and the tractor fueled up.
To get the drill to your site you will need a vehicle with a hitch. The hitch will need to have a hole large enough to accommodate a one inch pin for pulling.
Final note: The drill is only to be used in fields without stumps or rock layers where drill will be pulled across. Generally it is used to seed cropland areas (whole fields, wildlife food plots, filter strips, cover crops and such) or inter-seeding in pastures to improve stand. It is NOT for pastures where trees were cleared and stumps present. Fields will be checked as needed before renting the drill.
Link to forms related to use of the drill.
For more information:
Call (785) 266-9053
Email: [email protected]
Access the documents tab related to the no-till drill rental and operation on this website. In short, a $200 deposit and completed forms are required before the actual use of drill.
There is just one drill. We do the best to accommodate when you want the drill. We try and balance the current location of drill, weather and actual field condition you plan to drill and timeliness to the seed you are planting.
The drill is made possible by the following organizations.
Western Resources Green Team - Pheasants Fever Chapter of Pheasants Forever
Kaw Valley Chapter of Quail Unlimited - Wild Turkey Federation
and the
Shawnee County Conservation District
